Volden Kid Airvoice - Car Seat With Integrated Cooling Fan for Newbors to 12 Years

The Volden Kid Airvoice Child Car Seat is a suitable choice for children from 15 months to 12 years old, with a height range of 76–150 cm. It stands out with its ultra-slim design, lightweight 6.5 kg construction, ISOFIX + Top Tether installation, SIP protection, 3-level cooling fan, and Voice AI. It is designed to balance safety, child comfort, and convenience for parents.

What Makes the Volden Kid Airvoice Child Car Seat Stand Out?

Beyond focusing on protecting children in the vehicle, the Volden Kid Airvoice is equipped with various features designed to enhance comfort for children and make everyday operation more convenient for parents.

Meets the UN R129 Safety Standard

The Volden Kid Airvoice has an approval record under UN Regulation No. 129/03, approval number E8129R03/1014941*01.

The seat is used across two height stages:

• 76–105 cm, up to 18 kg: Uses the i-Size Universal ISOFIX configuration.
• 100–150 cm: Switches to the i-Size Booster Seat configuration.

This height-based classification makes it easier for parents to select the appropriate seat configuration for each stage of their child’s development.

Volden Kid Airvoice Child Car Seat – R129 Certified

ISOFIX + Top Tether for Secure Installation

The Volden Kid Airvoice uses an ISOFIX system combined with Top Tether to help keep the seat stable on the vehicle’s rear seat.

SIP Side Impact Protection

The seat is equipped with SIP (Side Impact Protection), a system designed to provide additional protection in the event of a side impact. The side protection elements create an additional protective zone around the child’s head, shoulders, and torso while seated.

Ultra-Slim Design, Weighing Only 6.5 kg

One of the most noticeable features of the Volden Kid Airvoice is its compact, slim design.

The seat features:

• Weight: 6.5 kg
• Dimensions: 57.8 × 46 × 49 cm

Thanks to its Slim-Fit design, the seat does not take up excessive space on the rear seat, making it suitable for families looking to maximize cabin space or those who frequently need to install and remove the seat.

3-Level Cooling Fan Helps Keep Your Child’s Back Cooler

Children who sit in a car seat for extended periods can easily experience heat and sweating around their back, especially in hot weather. The Volden Kid Airvoice features a 3-level cooling system that helps improve airflow around the areas where the child comes into contact with the seat.

Parents can choose from:

• Level 1: Gentle airflow
• Level 2: Moderate airflow
• Level 3: Stronger airflow

This allows parents to adjust the fan level according to the temperature inside the vehicle and their child’s comfort.

3-Level Cooling Fan Helps Keep Your Child’s Back Cooler

AI Voice Control for the Cooling Fan

Another convenient feature is Voice AI, which allows parents to control the fan using voice commands without having to repeatedly operate the seat manually. This is particularly useful when parents are sitting in the front and want to quickly adjust the airflow for their child.

Breathable and Comfortable Materials

The seat surface uses fabric combined with breathable mesh panels to help reduce heat and discomfort when the child’s body is in prolonged contact with the seat. The product uses textile materials certified under OEKO-TEX Standard 100.

How to Install the Volden Kid Airvoice Child Car Seat

The Volden Kid Airvoice is used in the forward-facing position within the appropriate height range. Installation is relatively straightforward, but parents should pay close attention to the ISOFIX and Top Tether connections before placing the child in the seat.

Step 1: Attach the ISOFIX

Place the seat on the rear seat of the vehicle, then insert both ISOFIX connectors into the vehicle’s designated ISOFIX anchor points. Push until you hear a “click.”

Check the indicators:

• Green: Correctly connected.
• Red: Check and reinstall.

Step 2: Attach the Top Tether

Hook the Top Tether strap onto the designated anchor point behind the vehicle seat. Then pull the strap tight until the indicator turns green.

Step 3: Check the Seat

• After installation, hold the seat firmly and gently shake it around the connection points.
• The seat should not move more than approximately 2.5 cm at the secured points.
• If the seat remains loose or the indicator is still red, parents should check the installation again before placing the child in the seat.

Step 4: Fasten the Child’s Safety Harness

Once the seat has been securely installed, adjust the harness and headrest according to the child’s height.

For Children Using the 5-Point Harness

1. Seat the child upright with their back firmly against the seat.
2. Adjust the headrest and shoulder strap positions appropriately.
3. Fasten the 5-point harness buckle.
4. Tighten the straps so they fit snugly against the child’s body.
5. Check that the straps are not twisted or excessively loose.

Perform the Pinch Test

• Try to pinch the harness webbing at the child’s shoulder.
• If you cannot pinch and fold the strap, the harness is sufficiently tight.
• The harness should fit snugly around the child’s body while remaining comfortable.

When the Child Gets Older

Once the child meets the requirements for booster mode, the seat can be converted to the i-Size Booster Seat configuration for children measuring 100–150 cm.

At this stage, parents should store the integrated harness system according to the instructions and use the vehicle’s 3-point seat belt to secure the child.

Always follow the child’s height and the instructions provided with the seat rather than relying solely on age.

How to Install the Volden Kid Airvoice Child Car Seat

How to Use the Cooling Fan and Voice AI

The system is easy to operate:

Step 1: Connect the Power

Connect the power cable to the cooling system’s power port.

Step 2: Activate Voice AI

Say:

“Hey Volden”

Step 3: Adjust the Fan

Parents can control the fan using commands such as:

• Fan on: Turn on the fan.
• Fan 1: Level 1.
• Fan 2: Level 2.
• Fan 3: Level 3.
• Fan off: Turn off the fan.

Parents should select a fan level that keeps the child comfortable; it is not necessary to use the highest level at all times.

How to Use the Cooling Fan and Voice AI

How to Clean the Volden Kid Airvoice Child Car Seat

To keep the seat clean and maintain its durability, parents should clean it regularly.

Cleaning the Seat Cover

• Remove the seat cover according to the instructions.
• Hand wash with cool water.
• Use a mild detergent.
• Allow it to air dry naturally in a well-ventilated area.

Avoid:

• Drying at high temperatures.
• Using harsh cleaning agents.
• Using corrosive chemicals.

Cleaning the Seat Frame and Electronic Components

• Use a soft, slightly damp cloth to wipe the plastic components and seat surfaces.
• For the cooling vents, speaker, and power ports, make sure they are completely dry before reconnecting the power.
• Do not spray water directly onto the fan, speaker, or connection ports.

Storage and Important Usage Guidelines

To keep the seat functioning properly, parents should:

• Store the seat in a dry place when not in use.
• Avoid exposing the seat to direct sunlight for extended periods.
• Do not modify the product’s structure.
• Do not use components that are incompatible with the seat.
• Check the ISOFIX and Top Tether connections before every journey.
• Check that the harness fits the child’s body correctly.
• Always use the appropriate seat configuration according to the child’s height.

If the seat has been involved in a collision or accident, parents should not continue using it immediately. Contact the distributor for inspection and further advice.

The Volden Kid Airvoice Child Car Seat stands out because its features are designed around practical everyday needs: a slimmer design to save space, a cooling fan to help keep the child’s back cooler, and Voice AI to make operation more convenient for parents. If you are looking for a car seat for a child from around 15 months old that combines safety with smart everyday features, the Volden Kid Airvoice is worth considering.